WH Series Rotary Timing Valves
The WH Series Rotary Timing Valve (RTV) is used for the transfer of high pressure hydraulic oil from stationary piping into or out of rotating machinery where automatic or manual on/off flow control is required. These are available in 4, 5, 6, 8 or 10 station versions. Modified or custom configurations are also available. All WH Series Rotary Timing Valves are of cylindrical configuration. Standard timing accuracy is within 1-2 degrees. All WH Series valves are shipped fully tested, lubricated and ready for installation.
Tool Pallette
| Item # | Number of Stations |
Overall Length |
Mounting Bolt Circle |
Max. Pressure |
Max. Rotation Speed |
Load/Unload Stations* |
Standard Connection Type |
Direct Replacement for Carr Lane P/N |
|---|---|---|---|---|---|---|---|---|
| WH2105 | 5 | 4.567 | 2.835 | 5000 | 10 | 1-S | 1/4 BSPP | CLR-502-V |
| WH2205 | 5 | 4.567 | 2.835 | 5000 | 10 | 2-CC | 1/4 BSPP | CLR-9298-012-V |
| WH2305 | 5 | 4.567 | 3.622 | 5000 | 10 | 2-IC | 1/4 BSPP | CLR-9290-102-V |
| *Abbrev | Station Explanation |
|---|---|
| -S | Single Station |
| -CC | Common Control Stations |
| -IC | Independent Control Stations |